Shopping Cart

Loose Cycles

INDUSTRY NINE Hydra Hub Set

€750,00

INDUSTRY NINE Hub Set MTB Hydra Classic 6-Bolt BOOST | Freehub SRAM XD | black | 32h


The Industry Nine Hydra Classic hubs are a real gem on every bike. Developed and produced in Asheville, North Carolina, they favorably set themselves apart from the competition with many small technical refinements. With their externally sealed bearing and stable axle , they are optimally protected against environmental influences and are also ideally equipped for downhill use. Tapered spoke flanges help to reduce the forces on the sensitive spoke heads and thus prevent spoke breaks.

However, the pawl freewheel on the rear wheel hub is revolutionary. It consists of a drive ring with 115 teeth and 6 staggered pawls. These are designed so that as soon as one of them has a frictional connection, the others can also absorb torques shortly afterwards. This means that a single jack only has the power to bear on its own for a very short time. The big plus of this system is an extremely short free travel with 0.52 °, which brings clear advantages in technical passages or when hard starts. In addition, the fine grid leads to a unique soundscape on the impeller.
The maintenance effort is also relatively low. You can disassemble and clean the hub without tools.


Technical data front wheel hub:

intended use : Cross Country, Marathon, All Mountain, Enduro
Material: aluminum, steel
axle type : 15x110 mm plug axis (BOOST / outboard)
Number of holes: 32 holes
Brake disc mount: 6-hole (IS2000)
bearing : 2x industrial bearing
Spoke type: Standard spokes (J-Bend)
Max. permissible spoke tension: kA
maximum system weight: n / a
Color: Black

Technical data rear hub:

intended use : Cross Country, Marathon, All Mountain, Enduro
Hub material: aluminum, steel
Material freewheel body: aluminum
axle type : 12x148 mm plug axis (Boost / outboard)
Number of holes: 32 holes
Brake disc mount: 6-hole (IS2000)
Freewheel compatibility: 11-speed and 12-speed SRAM XD MTB
Freewheel type: 6 pawls, 115 grids (engagement every 0.52 °)
bearing : 4x industrial bearing
Spoke type: Standard spokes (J-Bend)
Max. permissible spoke tension: kA
maximum system weight: n / a
Color: Black

Weight hub set: 455g